Contact Us
Phase-Xs | Biologics & Biosimilars | Coherent Market Insights

Cable joints are electronic joints that are used to connect and provide physical support to the cable. They are used to connect the cable end to another cable for physical and electrical interconnectivity in electronic equipment. They are available in different shapes, sizes, and configurations that can be used to interconnect low, medium, and high voltage electrical cables. They can be classified into straight-through joints, pot ends, branch which can be a T or Y joint, and indoor/outdoor terminations. All these offer reliable electrical connections between different electrical cables.

The Europe cable joint market is expected to witness significant growth during the forecast period (2021–20278. The increasing adoption of electric vehicles in the commercial and government sectors is expected to drive the market growth during the forecast period. For instance, in 2020, in Europe, the Department of Transport allocated approximately US$ 65 million for electric bus towns. The Department of Transport predicted that 200 electric buses can save around 7,400 tons of CO2 annually and play important role in bringing down emissions. Demand for electric vehicles, and the government investment in power infrastructure & charging stations across Europe is going to drive the demand for cable & cable joints during the forecast period. Moreover, rising urbanization and growing advanced infrastructure are also driving the market growth. In addition, increased investments in advanced technologies of power transmission and distribution systems, and the development of smart grids increases the demand for cable joints in the market. The technological advancements in smart grids generate efficient renewable power, reliable power, reduce carbon footprint by working with smart devices, and encourage the use of electric vehicles in Europe. Moreover, stringent government regulations to move towards electric vehicle have also led to the demand for cable & cable joints in Europe. For instance, in 2020, European Union set a target of net-zero greenhouse emissions by 2025.

Europe Cable Joint Market - Impact of Coronavirus (Covid-19) Pandemic

The situation caused significant deterioration in economic conditions and governments had to shut down commercial as well as educational sectors for a specific period. To combat COVID-19 pandemic, most of the countries implemented lockdown, and are now easing it phase-wise and industry wise. Cable joint market in Europe was negatively impacted by the COVID-19 pandemic.

Rest of Europe held dominant position in the Europe cable joint market during the forecast period

Statistics:

Rest of Europe held dominant position in the Europe cable joint market in 2020, accounting for 51.3% share in terms of value, followed by France, Germany and Others.

request-sample

Europe Cable Joint Market Report Coverage

Report Coverage Details
Base Year: 2019 Market Size in 2019: US$ 573.9 Mn
Historical Data for: 2017 to 2019 Forecast Period: 2020 to 2028
Forecast Period 2020 to 2028 CAGR: 4.5% 2027 Value Projection: US$ 801.2 Mn
Geographies covered:
  • Europe
Segments covered:
  • By Type: Indoor and Outdoor
  • By End-use Vertical: Power, Communication and Others
Companies covered:

Prysmian Group, General Cable Technologies Corporation (Prysmian Group), Nexans S.A., NKT A/S, ABB Ltd., 3M, Cable Jointing Solutions, Fujikura, Yamuna Power, Cellpack Electrical Products, Connect Cable Accessories Co., Ltd., Consumers Electric Corporation (Pvt) Ltd., IES Components Limited

Growth Drivers:
  • The increasing adoption of electric vehicles in the commercial and government sectors
  • Increasing demand for high-speed internet connectivity, increasing fiber to home (FTTH) subscriber base, and growing investment in the telecommunication infrastructure sector
Restraints & Challenges:
  • High Prices of Cable Joints

Figure 1: Europe Cable Joint Market Share (%), By Country, 2020

Europe Cable Joint  | Coherent Market Insights

Power segment is expected to drive the market growth during the forecast period

Among End-use Vertical, the power segment is expected to hold dominant position in the Europe cable joint market during the forecast period. Rising urbanization and growing advanced infrastructure are also driving the market growth. In addition, increased investments in advanced technologies of power transmission and distribution systems, and the development of smart grids increases the demand for cable joints in the market. Government investment in power infrastructure across Europe is going to drive the demand for cable & cable joints during the forecast period.

 Figure 2: Europe Cable Joint Market Value (US$ Mn) Analysis and Forecast and Y-o-Y Growth (%), 2017 - 2028

Europe Cable Joint  | Coherent Market Insights

The Europe cable joint market was valued at US$ 573.9 Mn in 2020 and is expected to reach US$ 801.2 Mn by 2028 at a CAGR of 4.5% between 2020 and 2028.

Major players operating in the europe cable joint market include Prysmian Group, General Cable Technologies Corporation (Prysmian Group), Nexans S.A., NKT A/S, ABB Ltd., 3M, Cable Jointing Solutions, Fujikura, Yamuna Power, Cellpack Electrical Products, Connect Cable Accessories Co., Ltd., Consumers Electric Corporation (Pvt) Ltd., IES Components Limited

Growth in the electrical and electronic industry due to the increasing production of electrical products is a prime factor propelling market growth of cable joints. Rapid urbanization coupled with the robust growth of the power sector around the globe is also expected to propel the market growth of the cable joint. Up-gradation in the electronic infrastructure across emerging markets coupled with the development in the various manufacturing sectors such as automotive, oil &gas, mining, and petrochemicals, etc. are further anticipated to augment the market growth of cable joints. Technological advancement in the cable joints by manufacturers is another major factor expected to fuel the market growth.

Market Dynamics

Increasing railway projects is expected to drive the market growth during the forecast period. The growing demand for railways in developed countries is increasing the demand for better rail infrastructure. In addition, some of the countries in Europe are also planning to invest in railway infrastructure, which increases the demand for cables & cable joints in the region. For instance, in 2020, Britain railways planned to invest approximately $50,000 million for the development of new trains and upgrading existing tracks. Furthermore, increasing safety concerns in the railway industry are also driving the market growth. The advancements in technologies can lead to higher energy consumption. To minimize power consumption, most of the companies are focusing on developing energy-efficient systems, which consume less electric energy. Railway manufacturers are focusing on improving the safety and security of railways by replacing existing systems with advanced systems. Therefore, the growing installation of high-end electronics and safety features in the metro, light, and high-speed rails is increasing the demand for cable joints in the market.

Key features of the study:

  • This report provides in-depth analysis of the Europe cable joint market size (US$ Million) and compound annual growth rate (CAGR %) for the forecast period (2021– 2028), considering 2020 as the base year
  • It elucidates potential revenue opportunities across different segments and explains attractive investment proposition matrices for this market
  • This study also provides key insights about market drivers, restraints, opportunities, new product launches or approvals, and competitive strategies adopted by the leading  market players
  • It profiles leading players in the Europe cable joint market based on the following parameters – company overview, financial performance, product portfolio, geographical presence, market capital, key developments, strategies, and future plans
  • Companies covered as a part of this study include Prysmian Group, General Cable Technologies Corporation (Prysmian Group), Nexans S.A., NKT A/S, ABB Ltd., 3M, Cable Jointing Solutions, Fujikura, Yamuna Power, Cellpack Electrical Products, Connect Cable Accessories Co., Ltd., Consumers Electric Corporation (Pvt) Ltd., IES Components Limited
  • Insights from this report would allow marketers and management authorities of companies to make informed decisions regarding future product launches, product upgrades, market expansion, and marketing tactics
  • The Europe cable joint market report caters to various stakeholders in this industry including investors, suppliers, managed service providers, third-party service providers, distributors, new entrants, and value-added resellers
  • Stakeholders would have ease in decision-making through various strategy matrices used in analyzing the Europe cable joint market

Detailed Segmentation

  • Europe Cable Joint Market, By Type:
    • Indoor
    • Outdoor
  • Europe Cable Joint Market, By End-use Vertical:
    • Power
    • Communication
    • Others
  • Europe Cable Joint Market, By Country:
    • Germany
    • U.K.
    • France
    • Italy
    • Spain
    • Russia
    • Rest of Europe
  • Company Profiles
    • Prysmian Group *
      • Company Overview
      • Product Portfolio
      • Financial Performance
      • Key Strategies
      • Recent Developments/ Updates
    • General Cable Technologies Corporation (Prysmian Group)
    • Nexans S.A.
    • NKT A/S
    • ABB Ltd.
    • 3M
    • Cable Jointing Solutions
    • Fujikura
    • Yamuna Power
    • Cellpack Electrical Products
    • Connect Cable Accessories Co., Ltd.
    • Consumers Electric Corporation (Pvt) Ltd.
    • IES Components Limited

 “*” marked represents similar segmentation in other categories in the respective section.

Table of Contents

  1. Research Objectives and Assumptions
    • Research Objectives
    • Assumptions
    • Abbreviations
  2. Market Purview
    • Report Description
      • Market Definition and Scope
    • Executive Summary
      • Market Snippet, By Type
      • Market Snippet, By End-use Vertical
      • Market Snippet, By Country
    • Coherent Opportunity Map (COM)
  3. Market Dynamics, Regulations, and Trends Analysis
    • Market Dynamics
      • Drivers
      • Restraints
      • Market Opportunities
    • Regulatory Scenario
    • Industry Trend
    • Merger and Acquisitions
    • New system Launch/Approvals
    • Value Chain Analysis
    • Porter’s Analysis
    • PEST Analysis
    • Impact of COVID-19
  4. Europe Cable Joint Market, By Type, 2021-2028 (US$ Million)
    • Introduction
      • Market Share Analysis, 2021 and 2028 (%)
      • Segment Trends
    • Indoor
      • Introduction
      • Market Size and Forecast, 2021–2028, (US$ Million)
    • Outdoor
      • Introduction
      • Market Size and Forecast, 2021–2028, (US$ Million)
  5. Europe Cable Joint Market, By End-use Vertical, 2021-2028 (US$ Million)
    • Introduction
      • Market Share Analysis, 2021 and 2028 (%)
      • Segment Trends
    • Power
      • Introduction
      • Market Size and Forecast, 2021–2028, (US$ Million)
    • Communication
      • Introduction
      • Market Size and Forecast, 2021–2028, (US$ Million)
    • Others
      • Introduction
      • Market Size and Forecast, 2021–2028, (US$ Million)
  6. Europe Cable Joint Market, By Country, 2021-2028 (US$ Million)
    • U.K
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • Germany
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • Spain
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • Italy
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • France
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • Russia
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
    • Rest of Europe
      • Country Trends
      • Market Size and Forecast, By Type, 2021–2028 (US$ Million)
      • Market Size and Forecast, By End-use Vertical, 2021–2028 (US$ Million)
  7. Competitive Landscape
    • Company Profiles
      • Prysmian Group
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • General Cable Technologies Corporation (Prysmian Group)
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Nexans S.A.
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • ABB Ltd.
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • 3M
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Cable Jointing Solutions
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Fujikura
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Yamuna Power
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Cellpack Electrical Products
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Connect Cable Accessories Co., Ltd.
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • Consumers Electric Corporation (Pvt) Ltd.
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
      • IES Components Limited
        • Company Overview
        • Product Portfolio
        • Financial Performance
        • Key Strategies
        • Recent Developments/Updates
    • Analyst Views
  8. Section
    • References
    • Research Methodology
    • About us and Sales Contact

*Browse 60 market data tables and 40 figures on "Cable Joint Market - Global forecast to 2028”.

Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.


Data Triangulation Methodology | Coherent Market Insights

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.

Market Analysis | Coherent Market Insights

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users

Subscribe Newsletter

Kindly Subscribe for our latest news & articles.