Contact Us

Carbide tipped needle holders are medical tools used in surgical procedures to hold surgical needles. These are designed to hold small size carbide needles for performing sutures in surgical procedures. Carbide tipped needle holders are similar to that of arterial forceps or hemostat clamps, which are used in surgical procedure to control bleeding.

These carbide tipped needle holders, with jaw, rings, and hinges, are perceptibly similar to normal scissors. Some of the characteristics of carbide needle holders are corrosion resistance, strength, and abrasion-resistant jaws. Recent developments in the needle holders design involve providing jaw inserts with a bonded metal coating containing tungsten carbide particles. These jaws provide a secure grip on the surgical needle while apparently diminishing the risk of damaging to the needle.

The advances in the health care sector is also increasing the use of carbide needle tipped holders item in all of surgery, including disposable emergency wound care kits. Various types of carbide tipped needle holders are present in the market such as narrow straight jaws, fine straight jaws, wide straight jaws, micro straight jaws, screw lock with spring handle, curved jaws, and serrated jaws.

Carbide Tipped Needle Holder Market Dynamics

Increasing number of accident injuries and trauma cases with increasing number of surgical procedures performed across the globe is expected to propel the carbide tipped needle holder market growth. For instance, according to the World Bank 2014 report, around 1.3 million people die due to road accidents each year and as many as 78.2 million are injured. Moreover, these figures will rise by around 65% over the following 20 years. The effect of the projected figures are greater in middle- and low-income countries.

Moreover, carbide tipped needle holders are not only used in complex surgical procedures, however, also in the trauma surgical operations, which involves sutures for controlling the blood loss due to large incisions made on a patient’s skin. These carbide tipped needle holders are even used in normal suture performing operations. According to study published in the Surgical Neurology International Journal 2015, the importance of needle holder, which allows a surgeon an excellent handling in placing tips into the vessel lumen for counter-pressure.

However, introduction of new needle holders are expected to hinder growth of the carbide tipped needle holders market sixe. For instance, according to a report published in the European Surgical Journal 2014, the development of a new needle holder facilitating palm grip suturing.

Carbide Tipped Needle Holder Market – Regional Insights

Based on regions, the global carbide tipped needle holders market is segmented into North America, Europe, Latin America, Asia Pacific, Middle East, and Africa. North America holds a dominant position in the carbide tipped needle holder market, due to quick adoption of technologically advanced products and increased healthcare spending from government organizations for durable medical equipment and other non-durable medical products in the region. For instance, according to the U.S. Centers for Medicare & Medicaid Services, retail spending for the other non-durable medical products, such as medical instruments and surgical equipment grew by US$ 62.2 billion in 2016.

Moreover, Asia Pacific market is expected to show significant growth, due to rising trauma and injury cases in the region. For instance, according to the Indian Ministry of Road Transport & Highways transport research wing, revealed around 4,80,652 road accidents occurred in 2016, calming 1,50,785 lives and 4,94,624 injured people.

Carbide Tipped Needle Holder Market – Competitive Landscape

Key players operating in the carbide tipped needle holders market include B. Braun Melsungen AG, LAWTON GmbH & Co. KG, August Reuchlen GmbH, J & J Instruments, Inc., Hu-Friedy Mfg. Co., Towne Brothers (PVT) LTD, STILLE, MEDICON eG, and Baxter. Key players are engaged in marketing strategies such as collaborations, mergers, partnerships, and introduction of new products in order to strengthen their position in the global market.

Carbide Tipped Needle Holder Market - Taxonomy

On the basis of product type, the global carbide tipped needle holder market is segmented into:

  • Narrow Straight Jaws
  • Fine Straight Jaws
  • Wide Straight Jaws
  • Micro Straight Jaws
  • Screw Lock with Spring Handle
  • Curved Jaws
  • Serrated Jaws

On the basis of application, the global carbide tipped needle holder market is segmented into:

  • Surgical Operation
  • Dental Operation
  • Veterinary Surgery
  • Others

On the basis of geography, the global carbide tipped needle holder market is segmented into:

  • North America
  • Latin America
  • Europe
  • Asia Pacific
  • Middle East
  • Africa

Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.

Data Triangulation Methodology | Coherent Market Insights

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.

Market Analysis | Coherent Market Insights

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users