Contact Us

Integrated circuit, also called as monolithic electronic circuit, is an electronic circuit build on a flat semiconductor material, mostly silicon. Radio frequency integrated circuit is also an electronic circuit, which includes radar and communication circuits that are majorly used for wireless transmission. IC and RFIC designing is a part of electronics engineering, which focuses on designing of logic and circuit design of integrated circuit. These ICs are made by connecting small electronic components into an electrical network on a monolithic semiconductor substrate using a patterning process called photolithography.

Increasing Demand for Power-Sensitive Wireless-Communication Products Has Fueled Demand for IC and RFIC Designing Services

In the recent past, electronic devices market exhibited an exponential growth. This is owing to increasing demand for wireless communication devices such as mobile phones, Wi-Fi, satellites, and televisions among others, which resulted in increasing development of new generation IC and RFIC products. Moreover, companies operating in the electronic devices industry are focusing on designing small IC and RFIC to reduce the size of electronic products and reduce the cost by integrating number of components on single chip. These factors are expected to drive growth of the IC and RFIC designing services market during the forecast period (2019-27). For instance, according to Coherent Market Insights’ analysis, the consumer electronic market, wherein IC and RFIC designing services are mostly used, is expected to exhibit a CAGR of around 16% during 2019-2022.

Moreover, conventional RF devices face many problems related to designing of single-chip transceivers, active, and passive devices on an IC. Owing to such challenges, electronic device manufacturers are focusing on design, simulation, and layout of wireless-communication RFIC chips. Moreover, the manufacturers are using on-chip components over off-chip components by modifying the architecture of IC and RFIC, which will propel demand for IC and RFIC designing services, as it will help to solve the issues related to integration of transceiver components on to a chip and to fulfill the rising demand for communication devices.

Regional Analysis of Global IC and RFIC Designing Services Market

On the basis of region, the global IC and RFIC designing services market is segmented into North America, Europe, Latin America, Asia Pacific, Middle East, and Africa.

Asia Pacific region held dominant position in the global IC and RFIC designing services market in 2018 and is projected to retain its dominance throughout the forecast period. This is owing to presence of large number of electronic component manufacturers such as Arrow Group and TDK Corporation among others in this region, which uses designing services for manufacturing IC and RFIC.

Global IC and RFIC Designing Services Market Taxonomy

On the basis of product type, the global IC and RFIC designing services market is segmented into

  • Digital Design
  • Analog and Mixed Design

On the basis of application, the global IC and RFIC designing services market is segmented into

  • Circuit Design
  • Layout Design
  • Package Design
  • Others

On the basis of end user, the global IC and RFIC designing services market is segmented into

  • Consumer Electronics
  • Data Centers
  • Automotive
  • Smart Devices
  • Others

On the basis of region, the global IC and RFIC designing services market is segmented into

  • North America
  • Europe
  • Asia Pacific
  • Latin America
  • Middle East
  • Africa

Major players operating in the global IC and RFIC designing services market include AnSem, Australian Microwave Components, Cadence Design Systems, Inc., Cirtec Medical, CoreHW, Custom MMIC, Evatronix SA, IC Mask Design Ltd, Mentor, a Siemens Business, Plan 9, RADLogic, RFIC Solutions, Signal Processing Group Inc., SM Technologies Pvt. Ltd, and TES Corporation.


Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.

Data Triangulation Methodology | Coherent Market Insights

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.

Market Analysis | Coherent Market Insights

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users