Residue Hydro Desulfurization Catalyst Market: Introduction
Residue hydro desulfurization is a procedure to remove sulfur, nitrogen, and other contamination from natural gas and refined petroleum products including fuel oil, diesel fuel, and others. As sulfur dioxide (SO2) is responsible for increasing pollution in the environment, the process reduce SO2 emissions from fuels. These fuels are majorly used in vehicles, aircraft ships, gas & oil burning power plants, fuel combustion, railroad locomotives, residential & industrial furnaces.
Furthermore, catalyst are used to demonstrate high desulfurization performance for light gas oil, kerosene and other which have high nitrogen concentration. Such oils are difficult to desulfurize including vacuum gas oil, FCC light cycle oil (LCO).
Implementation of stringent norms to reduce harmful emission from vehicle is paving the way for advanced emission control technologies in vehicles and engines, which is boosting demand for clean fuels such as ultra-low sulfur gasoline (ULSG) and ultra-low diesel fuel (ULSD). For instance, as per the national diesel sulfur standard prevailing in the emerging countries such as India is limited to 350 ppm, along with 50ppm which is required to maintain in major Indian cities. Regulating bodies’ measures to maintain sulfur standards for diesel and gasoline creates awareness in the market to reduce harmful emissions. These clean fuels are obtained by hydro desulfurization catalytic process.
Furthermore, rising exposure of harmful air particulates such as sulfur oxide, nitrogen oxide, and others are propelling the residue hydro desulfurization catalyst market. Such exposure might cause serious health implications and lead to deaths, across the globe. This residue hydro desulfurization process lowers down the content of sulfur and nitrogen oxide, which would reduce fuel emission from engines and vehicles. According to Our World in Data, in 2015, Saudi Arabia, and Egypt witnessed highest levels of exposure to such particulates at 105 µg/m3, while countries across Europe, Oceania, and North America had air particulate levels at 5-10µg/m3. Moreover, according to World Health Organization, about 3 million people across the globe died due to ambient air pollution in 2012.
North America is expected to achieve significant growth in the market during the forecast period, owing to the stringent standards on gasoline volatility, benzene content, and diesel fuel aromatics content, which limits the exposure of harmful emission via residue hydro desulfurization catalyst. For instance, in 2016, the U.S. implemented diesel and gasoline sulfur standards of 30 ppm (average) and 10 ppm (cap), respectively.
Asia Pacific is expected to sustain lucrative growth rate in the residue hydro desulfurization market during the forecast period. This is attributed to rising pollution related deaths in the region. The residue hydro desulfurization catalyst process reduces the amount of sulfur content in the petroleum products, which in turn would reduce the harmful emissions. According to the Our World in Data, South Asia, Southeast Asia, and East Asia witnessed about 3 million deaths due to exposer to harmful emissions in 2016.
Key Players in the Residue Hydro Desulfurization Catalyst Market
Key players operating in the market include CRI Catalyst Leuna GmbH, Redkino Catalyst Company, Albemarle Corp, Honeywell UOP, Johnson Matthey PLC, Haldor Topsoe A/S, Clariant AG, Chevron Phillips Chemical Company, W.R. Grace & Co, Axens S.A., and others.
Major players adopt various business strategies such as mergers & acquisitions, new product launches, and product development to gain strong foothold in the market. For instance, in 2016, S-Oil partnered with General Atomics Electromagnetic Systems (GA-EMS), to provide electrostatic separation technology and equipment for its installation in residue upgrading complex (RUC) in Onsan refinery complex in Ulsan, South Korea.
The residue hydro desulfurization catalyst steel market is segmented on the basis of application, end-use Industry, and region:
By End-use Industry
Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:
In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.
Coherent Market Insights desk research is based on a principle set of research techniques:
Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:
Preliminary Data Mining
The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.
Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.
Coherent Statistical model
We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:
Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.
This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:
The primary research is conducted with the ecosystem players including, but not limited to:
Finding it difficult to find the research that would cater to your business demands? Give us a chance to help you. One of our Research Consultants will connect to provide a customized solution.[email protected]
Talk to our research consultant to design an exclusive report as per your research needs.
We aim to fulfil client's research demands with tailored research solutions.
We aim to provide research studies in quickest turnaround time and in a much cost effective manner.
We cover each industry from supply and demand side with an aim to provide a most holistic research study.
We strive to provide most accurate and reliable research findings in our research reports.