NVH Materials Market Overview
Noise, Vibration, and Harness (NVH) materials are specifically used to reduce noise and vibration of vehicles. NVH materials are used within the interiors of the vehicle to reduce noise and vibrations experienced due to occupants in the cabin, while it is also use on the exterior to reduce the noise and vibrations by the vehicle. The key sources of noise from a vehicle include engine, driveline, tires, brakes, and wind. Vibrations are usually experienced at the steering vehicle, seats, armrests, pedals, floor, and doors. NVH materials are acoustic devices which are generally classified as sound absorbing materials, sound barrier materials, and sound damping materials. Sound absorbing materials are porous polyurethane foam and their sound attenuating properties are determined by the normal specific sound absorbing coefficient. The sound barrier materials are non-porous and heavy, and usually used to barrier the transition. The sound damping materials are used to dampen the structural vibrations at the resonance structure to which these materials are attached. These materials are converted into products and then applied throughout the vehicle body.
Global NVH Materials Taxonomy
The global NVH Materials market is classified on the basis of the following segments:
Prevalent Scenario in NVH Materials Market
Rapidly increasing population, fast growing urbanization, and increasing demand for cars are the major drivers for the NVH materials market. According to the International Organization of Motor Vehicle Manufacturers, the global automotive production in 2016 accounted for 94.9 million units of which about 75% share was contributed by cars. Moreover, there are increasing warranty claims imposed by regulatory authorities in the interest of the customers against the noise, vibration, and harness. This has led the automotive manufacturers to aggressively invest in research and development to develop and incorporate NVH materials in the automotive environment. The consumers are focusing on the vehicle performance in terms of speed, horsepower, fuel economy, comfort, and NVH characteristics which affect their buying decision. Owing to their lightweight and flexibility, the foam laminates are widely used as insulation materials for floor insulation, door insulation, floor lining, and cushioning of vehicles. Rubber has higher strength, flexibility, density, and chemical stability as compared to foam and hence is excessively used in sealing and lining solutions. The changing regulations and standards imposed by international and local authorities regarding the specific vehicle weights in different part of the world have anticipated the growth of the light weight and acoustic products such as NVH materials to reduce the noise, vibration, and harness of the vehicle and reduce the overall vehicle weight, increase vehicle durability, and enhance its fuel efficiency.
Emerging economies such as China and India are experiencing immense growth in the automobile sector due to rapidly increasing population and rising living standards in these countries. Moreover, abundant availability of raw materials and cheap labor in these countries have led to the key global manufacturers to set up their operation units and cater to the increasing demand for automobile in these countries. This scenario has fueled the growth of the NVH materials in the Asia-Pacific region as compared to North America and Europe.
The global NVH materials market is highly fragmented due to the presence of many established and local players across the world. Major players involved in the market include BASF SE, The DOW Chemical Company, Exxonmobil Corporation, 3M Company, Mitsui Chemicals, Inc., Sumitomo Riko Company Limited, Covestro AG, Celanese Corporation, Huntsman Corporation, Lanxess AG, and Borgers AG.
Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:
In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.
Coherent Market Insights desk research is based on a principle set of research techniques:
Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:
Preliminary Data Mining
The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.
Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.
Coherent Statistical model
We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:
Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.
This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:
The primary research is conducted with the ecosystem players including, but not limited to:
Finding it difficult to find the research that would cater to your business demands? Give us a chance to help you. One of our Research Consultants will connect to provide a customized solution.[email protected]
Talk to our research consultant to design an exclusive report as per your research needs.
We aim to fulfil client's research demands with tailored research solutions.
We aim to provide research studies in quickest turnaround time and in a much cost effective manner.
We cover each industry from supply and demand side with an aim to provide a most holistic research study.
We strive to provide most accurate and reliable research findings in our research reports.