Sterilization Equipment Market - Global Industry Insights, Trends, Outlook, and Opportunity Analysis, 2018-2026

  • To Be Published : Nov 2018 |
  • Format : CMI Insight PPT Format CMI Insight PDF Format

Sterilization is a process that kills, eliminates, deactivates or removes all form of life and other biological agents from a specific surface, fluid, medication or biological culture. Sterilization can be achieved through various means such as chemicals, heat, irradiation, filtration, and high pressure. Sterilization equipment are mainly used in laboratories, particularly microbiology and medical. Autoclave is a most important sterilization equipment, as it can be used to sterilize laboratory equipment such as glassware and micro centrifuge tubes, and medical equipment. Chemicals, fluids, water or food used for experiments are also sterilized in autoclave. Other sterilizing equipment include dry heat sterilizing equipment such as hot air ovens, which are used to sterilize metal instruments, needles, and petroleum products. Glass beads sterilizers are employed for sterilizing instruments that are re-used, however, these are not FDA-approved.

Sterilization market has gained traction in the recent past due to increasing awareness about infection and diseases caused due to non-sterile environment. Increasing investment in research and healthcare infrastructure focused on public health sterilization equipment is increasing significantly. Utilization of unsterilized equipment leads to serious infection threatening public health such as the spread of HIV and lethal hepatitis. Government also aids growth of the market, as the Food and drug administration (FDA) approves marketing of products only when produced in sterile and hygienic conditions. Department of health and human services have formed the guidelines for disinfection and sterilization in healthcare facilities in 2008, which was re-updated in 2014 and February 2017, on the basis of various new infection such as Ebola virus disease. Medical waste requires to be decontaminated before being disposed, so as to prevent threat of disease spreading. This is increasing the demand for sterilizable equipment, thus boosting growth of the sterilization equipment market.

Global Sterilization equipment market taxonomy.

By Product Type

  • Autoclave
    • Bench Top Autoclave
    • Vertical Autoclave
    • Vertical Mobile Autoclave
    • Floor Standing Autoclave
    • Portable Autoclave
  • Hot Air Oven
    • Bench Top Hot Air Oven
  • Low-temperature Sterilizers
    • Hydrogen Peroxide Sterilization
    • Ethylene Oxide Sterilization
    • Formaldehyde Sterilization
    • Nitrogen Dioxide (NO2) Sterilization
    • Ozone-based Medical Sterilization
    • Superheated Water Spray Sterilization
  • Filter Sterilization 
  • Ionizing Radiation Sterilization
    • Electron
    • X-ray
    • Gamma

By Technology

  • Gravity
  • Vacuum
  • Steam
  • Forced convention
  • Natural convention

By End User

  • Pharmaceutical Manufacturers
  • Diagnostic Labs
  • Medical Device Manufacturers
  • Others

Increasing health and hygiene awareness fuels market growth

Growing population coupled with increasing incidence of communicable diseases such as viral and bacterial infections is increasing the demand for sterilization equipment. Furthermore, growing awareness regarding sterilization and cleanliness among the people is expected increase growth of the sterilizing equipment market in the near future. Development of global medical equipment facility, has in turn, positively impacted growth of the sterilization equipment market. Moreover, apart from the healthcare department, the food and beverages industry is also one of the prime consumers of sterilization equipment. Extensive use of sterilized containers for packaging and storing food supplies, the demand for sterilization equipment is expected to increase in the food sector. TSO3 Inc., an innovator in sterilization technology for medical devices in healthcare settings, reported sales of US$ 432,987 in 2014, as compared to US$ 254,370 in 2013.

Government support drives growth of the sterilization equipment market

North America market holds a dominant position in the market, owing to increasing number of surgical procedures in hospitals in the U.S. and Canada. Whereas, Asia Pacific countries such as Japan and China show significant growth of the sterilization equipment market due to evolving medical facility and government regulations for utilization of sterilized equipment to avoid hospital-acquired infections. Moreover, increasing investment in medical services in the Middle East and Africa is expected to boost growth of the sterilization equipment market in the regions. However, high cost of sterilization equipment in emerging economies acts as barrier for revenue growth of sterilization equipment market.

Major acquisitions to support growth of sterilization equipment market

Cantel Medical Corp 2016, revenue increased 17.7% to a record of US$ 664.8 million from US$ 488,749 in 2014. Key players operating in sterilization equipment market include Cantel Medical Corp. (USA), 3M Company (USA), Belimed AG (Switzerland), Andersen Products, Inc. (USA), Advanced Sterilization Products (USA), Matachana Group, Sterile Technologies, Inc. (US), Getinge AB (Sweden), and Sterigenics International, Inc. (USA).

Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.


Smiley face

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.
Smiley face

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization:

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users

Choose License Type

"How Can I Help You" ?

Finding it difficult to find the research that would cater to your business demands? Give us a chance to help you. One of our Research Consultants will connect to provide a customized solution.

[email protected]

Key Benefits

  • Custom Research Solution

    Talk to our research consultant to design an exclusive report as per your research needs.

  • Customer Fulfilment

    We aim to fulfil client's research demands with tailored research solutions.

  • Quick Turnaround Time Reports

    We aim to provide research studies in quickest turnaround time and in a much cost effective manner.

  • 360-degree Approach

    We cover each industry from supply and demand side with an aim to provide a most holistic research study.

  • Assured Quality

    We strive to provide most accurate and reliable research findings in our research reports.