Titanocene Dichloride Market, By Derivatives (Alkoxyl, Alkyl, and Azo), By Application (Polymerization, Hydrogenation, Organic Synthesis, Active Pharmaceutical Ingredient, and Semiconductors), By End-use Industry (Coatings and Packaging, Pharmaceutical, Electronics, Automobile, and Agricultural), By Region (North America, South America, Europe, Asia Pacific, and Middle East & Africa) – Size, Share, Outlook, and Opportunity Analysis, 2018 – 2026

  • To Be Published : Mar 2019 |
  • Format : CMI Insight PPT Format CMI Insight PDF Format

Titanocene dichloride (TDC) is a red colored solid organometallic compound prepared from titanium tetrachloride. Its rising demand can be attributed to its varied properties such as catalyzing activity in organic-inorganic chemical synthesis, electrical conductivity, and ability to be incorporated in plant growth hormones, among others. Such properties find its application in various end-use industries such as fine chemicals, electronics, and agricultural among others.

Market Dynamics:

  • The anticancer activity shown by TDC is expected to be a major driver for its market growth. A fact sheet by the World Health Organization (WHO) in September 2018 reported 18,078,957 cases of cancer, out of which 9,555,027 were reported as death cases, worldwide whereas 57.3% of them were found in Asian countries. TDC has the potential to become a preventive measure against cancer death cases.
  • However, poor solubility of TDC created issues in clinical trial and this is expected to hamper the market growth

Global Titanocene Dichloride Market Outlook: 

  • Among application, polymerization segment is expected to account for the largest market share. TDC is used as a catalyst in polymerization reactions of propylene and ethylene, which are used to produce linear-low density polyethylene (for heat-sealing films), ethylene-propylene, ethylene-propylenediene rubber, and others. The demand for polypropylene and polyethylene is increasing due to its application in plastics, packaging, and automobiles. According to plastics and composites sector report (2015) of Academy of Sciences Malaysia, the global plastic demand is expected to reach 600 million tons by 2050. Emerging economies in Asia such as India is expected to contribute to higher market growth.
  • According to a knowledge paper of Federation of Indian Chambers of Commerce and Industry (February 2017), a plastic processing industry in India is expected to grow at a CAGR of 10.5% from 2015 to 2020 to reach 22 million metric tons per annum, which would in turn increase the demand for TDC

Key players:

  • Key players operating in the global titanocene dichloride market include Boulder Scientific, CM Fine Chemicals, Richman Chemical, Merck Schuchardt OHG, Intatrade Chemicals GmbH, Chemos GmbH & Co. KG, Novasep, Nebula Chemicals Co, Ltd., Haihang Industry Co., Ltd., AkzoNobel Polymer Chemistry, and Santa Cruz Biotechnology

Global Titanocene Dichloride Market Taxonomy:

On the basis of derivatives, the global titanocene dichloride market is segmented into:

  • Alkoxyl
  • Alkyl
  • Azo

On the basis of application, the global titanocene dichloride market is segmented into:

  • Polymerization
  • Hydrogenation
  • Organic Synthesis
  • Active Pharmaceutical Ingredient
  • Semiconductors

On the basis of end-use industry, the global titanocene dichloride market is segmented into:

  • Coatings and Packaging
  • Pharmaceutical
  • Electronics
  • Automobiles
  • Agricultural

On the basis of region, the global titanocene dichloride market is segmented into:

  • North America
    • U.S.
    • Canada
    • Mexico
  • South America
    • Brazil
    • Argentina
    • Rest of South America
  • Europe
    • U.K.
    • Germany
    • Italy
    • France
    • Spain
    • Russia
    • Rest of Europe
  • Asia Pacific
    • China
    • India
    • Japan
    • South Korea
    • ASEAN
    • Australia
    • Rest of Asia Pacific
  • Middle East & Africa

Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.


Smiley face

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.
Smiley face

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization:

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users

Choose License Type

"How Can I Help You" ?

Finding it difficult to find the research that would cater to your business demands? Give us a chance to help you. One of our Research Consultants will connect to provide a customized solution.

[email protected]

Key Benefits

  • Custom Research Solution

    Talk to our research consultant to design an exclusive report as per your research needs.

  • Customer Fulfilment

    We aim to fulfil client's research demands with tailored research solutions.

  • Quick Turnaround Time Reports

    We aim to provide research studies in quickest turnaround time and in a much cost effective manner.

  • 360-degree Approach

    We cover each industry from supply and demand side with an aim to provide a most holistic research study.

  • Assured Quality

    We strive to provide most accurate and reliable research findings in our research reports.