Road Marking Materials Market - Global Industry Insights, Trends, Outlook, and Opportunity Analysis, 2017–2025

Road marking materials are used to make road markers on pathways and roadways are to provide information to driver and pedestrians and provide signs on motorways, streets, berms, parking areas and airfields. Markings are standardized and improve road safety and to avoid confusion in driveways. Road marking materials are classified into two types of materials that are paint based marking and performance based marking. Performance based marking is further categorized into cold plastics and thermoplastics and paint based marking are categorized into water-based, epoxy, polyurethane-based paints and solvent based paints. Paint based marking is estimated to drive the road marking materials market over the forecast period.

Paint based marking, specifically water based paints, is expected to fuel the demand for the global road marking materials market with increase in production capacity coupled with rapid urbanization and low cost of paints. Epoxy paints are paint based marking material which is expected to gain traction in the forecast period for the road marking materials market due to its low rate of dirt pickup and has exceptional adhesive properties. Technological advancement to decrease maintenance cost such as intelligent road marking system, increasing application in airways and government safety standards are some of the factors to drive the global road marking materials market during the forecast period. Thermoplastics and solvent based paints are extensively used for road marking due to various properties such as quick drying, inexpensive, enhance adhesion to oily and asphaltic surfaces. In new developments cold plastics are new economical materials which comprise of water-reducing agent, thermoplastic resin, mineral filler, and colorant which have high potential of growth in the global road marking materials market. Polymerization is a chemical reaction which helps the plastic to harden onto the road surfaces. Owing to these factors global road marking materials market is expected to increase at a significant growth rate over the forecast period (2017-2025).

Road Marking Materials Market Taxonomy

On the basis of application, the global road marking materials market is segmented into:

  • Airport marking
  • Space marking
    • forklift working spaces
    • unsafe zones
    • loading bays
    • safe designated (walkways and stairs)
    • workshop demarcations
    • internal floors in warehouses
    • distribution and logistics centers
  • Highway marking
  • Factory marking
  • Car park marking
  • Others

On the basis of material types, the global road marking materials market is segmented into:

  • Paint-based marking
    • Epoxy-based paint
    • Polyurethane-based paint
    • Water-based paints
    • Solvent-based paint
  • Performance-based marking
    • Thermoplastics
    • Cold plastics
  • Others

Increasing awareness for visibility during nighttime travels and road safety in last decade is expected to drive the global road marking materials market during the forecast period. There are various road markings available such as white line marking, double yellow line marking, and single line marking, which includes motorways and highways, bus and cycle lanes, pedestrian crossings, and private roads. The choice of road marking material is governed by its price, durability, and application area.

In terms of material types, paint-based markings segment is the leading contributor to the global road marking materials market, exceeding the performance-based markings segment by a huge margin in 2015. Owing to its longer durability and low costs, paint-based coatings are more favored as compared to performance based products.

Road Marking Materials Market Outlook –

Asia Pacific market for road marking materials is accounted to be dominated in 2015 and is expected to remain dominated during the forecast period due to increase in highway construction and roadways, awareness for workplace safety, road safety and development in construction sector. Rising awareness on safety coupled with urbanization in India and China is expected to lead the global road marking materials market over the forecast period.

Global road marking materials market is a competitive market among which Asian Paints PPG is the market leader in the field of thermoplastic road markings. APCOMARK is product of Asian paints used is manufactured under the rule of clause 803.4, "Specifications for Road and Bridge Works" of Ministry of Road Transport & Highways. For the famed Golden Quadrilateral and NSEW project of NHAI across the country., APCOMARK has been used. According to United States Department of Labor, part title occupational safety and health standards, part number 1910, sub part ‘J’, safety color code for physical hazards marking are: 1910.144(a) for color identification, 1910.144(a)(1) for Red. Red will be the color for identification of: 1910.144(a)(1)(i)- Fire protection equipment and apparatus, 1910.144(a)(1)(ii)-Danger, red lights should be provided at temporary obstructions and  obstructions. Danger signs shall be painted red, 1910.144(a)(1)(iii)-Stop, stop bars on hazardous machines such as flat work ironers, rubber mills,  wire blocks, etc., shall be red. 1910.144(a)(3) for Yellow, Yellow shall be  for  caution and for physical hazards such as: Striking against, stumbling, tripping, falling, and "caught in between."

Some of the key participating players in the road marking materials market are Aximum S.A.,  The Sherwin-Williams Company, Geveko Markings, Ozark Materials LLC, Lackfabrik GmbH, Swarco Limburger and Kelly Bros Erinline along with others.

Research Methodology

Coherent Market Insights followsa comprehensive research methodology focused on providing the most precise market analysis. The company leverages a data triangulation model which helps company to gauge the market dynamics and provide accurate estimates. Key components of the research methodologies followed for all our market reports include:

  • Primary Research (Trade Surveys and Experts Interviews)
  • Desk Research
  • Proprietor Data Analytics Model

In addition to this, Coherent Market Insights has access to a wide range of the regional and global reputed paid data bases, which helps the company to figure out the regional and global market trends and dynamics. The company analyses the industry from the 360 Degree Perspective i.e. from the Supply Side and Demand Side which enables us to provide granular details of the entire ecosystem for each study. Finally, a Top-Down approach and Bottom-Up approach is followed to arrive at ultimate research findings.


Smiley face

Coherent Market Insights desk research is based on a principle set of research techniques:

  • National level desk research: It Includes research analysis of regional players, regional regulatory bodies, regional trade associations, and regional organization.
  • Multinational level desk research: The research team keeps a track of multinational players, global regulatory bodies, global trade associations, and global organization.

Coherent Market Insights has a large amount of in-house repository of industry database. This is leveraged as a burner for initiating a new research study. Key secondary sources include:

  • Governmental bodies, National and international social welfare institutions, and organizations creating economic policies among others.
  • Trade association, National and international media and trade press.
  • Company Annual reports, SEC filings, Corporate Presentations, press release, news, and specification sheet of manufacturers, system integrators, brick and mortar - distributors and retailers, and third party online commerce players.
  • Scientific journals, and other technical magazines and whitepapers.
Smiley face

Preliminary Data Mining

The raw data is obtained through the secondary findings, in house repositories, and trade surveys. It is then filtered to ensure that the relevant information including industry dynamics, trends, and outlook is retained for further research process.

Data Standardization:

Holistic approach is used to ensure that the granular and uncommon parameters are taken into consideration to ensure accurate results. The information from the paid databases are further combined to the raw data in order to standardize it.

Coherent Statistical model

We arrive at our final research findings through simulation models. Coherent Data Analytics Model is a statistical tool that helps company to forecast market estimates. Few of the parameters considered as a part of the statistical model include:

  • Micro-economic indicators
  • Macro-economic indicators
  • Environmental indicators
  • Socio-political indicators
  • Technology indicators

Data Processing

Once the findings are derived from the statistical model, large volume of data is process to confirm accurate research results. Data analytics and processing tools are adopted to process large chunk of collected informative data. In case, a client customizes the study during the process, the research finding till then are benchmarked, and the process for new research requirement is initiated again.

Data Validation

This is the most crucial stage of the research process. Primary Interviews are conducted to validate the data and analysis. This helps in achieving the following purposes:

  • It provides first-hand information on the market dynamics, outlook, and growth parameters.
  • Industry experts validates the estimates which helps the company to cement the on-going research study.
  • Primary research includes online surveys, face-to face interviews, and telephonic interviews.

The primary research is conducted with the ecosystem players including, but not limited to:

  • Raw Material Suppliers
  • Manufacturers
  • System Integrators
  • Distributors
  • End-users

Choose License Type

"How Can I Help You" ?

Finding it difficult to find the research that would cater to your business demands? Give us a chance to help you. One of our Research Consultants will connect to provide a customized solution.

[email protected]

Key Benefits

  • Custom Research Solution

    Talk to our research consultant to design an exclusive report as per your research needs.

  • Customer Fulfilment

    We aim to fulfil client's research demands with tailored research solutions.

  • Quick Turnaround Time Reports

    We aim to provide research studies in quickest turnaround time and in a much cost effective manner.

  • 360-degree Approach

    We cover each industry from supply and demand side with an aim to provide a most holistic research study.

  • Assured Quality

    We strive to provide most accurate and reliable research findings in our research reports.