AUTOMOTIVE ACTIVE PURGE PUMP MARKET SIZE AND SHARE ANALYSIS - GROWTH TRENDS AND FORECASTS (2024 - 2031)

Market Size and Trends

Global automotive active purge pump market is estimated to be valued at US$ 199.96 Mn in 2024 and is expected to reach US$ 283.94 Mn by 2031, exhibiting a compound annual growth rate (CAGR) of 5.1% from 2024 to 2031.

To learn more about this report, request a free sample copy

There has been increase in demand for active purge pumps due to stringent emission norms and growing adoption of activated carbon canister systems in vehicles. These pumps assist in purging the evaporated fuel from the canister and help in lowering vehicle emissions. Rising automobile production and sales across major markets such as China, India, U.S., Germany boosts the need for effective emission control systems. Growing concerns regarding environment protection and sustainability has boosted adoption of active purge pumps by OEMs globally.

Market Driver: To Reduce Tailpipe Emissions

One of the primary drivers for growing automotive active purge pump market is the need to reduce harmful tailpipe emissions from vehicles. Various regulations implemented by environmental agencies across the world have made it mandatory for all new vehicles to meet stringent emission standards and lower their carbon footprint. As automakers work to curb emission levels and improve fuel efficiency, active purge pumps are playing a crucial role.

Active purge pumps are used in vehicles equipped with evaporative emission control systems. These systems capture fuel vapors from the fuel tank and lines and divert them to the engine to be burned rather than vented into the atmosphere. However, over time, the charcoal canister that stores these fuel vapors becomes saturated. This is where the active purge pump becomes important. It draws the fuel vapors out of the charcoal canister and pumps them into the engine intake manifold where these can be incinerated during the combustion process. Without an active purge, the saturated canister would simply vent the fuel vapors out of the tailpipe, thus, increasing harmful emissions.

By facilitating the complete recycling of fuel vapors, active purge pumps help cut down hydrocarbons and other volatile organic compound emissions from vehicles. This allows automakers to meet the toughening emission norms around the world with respect to hydrocarbon, nitrogen oxide and particulate matters. These pumps play a key role in reducing dependence on fossil fuels and curbing the emission of greenhouse gases that are accelerating climate change. With more markets introducing EURO-6 emission standards and even moving towards electric vehicles, automakers will continue investing in active purge technologies to bring cleaner vehicles on road.

Market Concentration and Competitive Landscape

To learn more about this report, request a free sample copy

To Improve Fuel Economy

Another major factor contributing to the growth of automotive active purge pump market is the need for better fuel efficiency. With fuel prices rising consistently across many regions and consumers demanding more miles per gallon, automakers are under pressure to optimize fuel consumption in vehicles. Active purge pumps optimize the fuel trimmings process, thus,  enhancing fuel economy.

The pumps aid in recovering evaporative fuel vapors from the charcoal canister to be recycled back into the engine during the ignition cycle. This ensures that none of the hydrocarbons produced during fuel evaporation goes wasted. By drawing out the saturated vapors and pumping them into the combustion chamber, active purge pumps allow for complete incineration of all fuel entering the vehicle. 

To learn more about this report, request a free sample copy

One of the key challenges faced by the automotive active purge pump market is the pressure to reduce vehicle weight and improve fuel efficiency to meet tighter emission regulations. As purge pumps are designed to remove hydrocarbon vapors from a vehicle's evaporative emission control system, these add weight to the vehicle. Manufacturers are under pressure to develop lighter and more compact purge pump designs that maintain performance. Another challenge is making active purge pumps durable enough to withstand extreme temperatures and harsh under-hood road conditions over the lifetime of a vehicle.

Market Opportunity: Development of advanced and cost-effective active purge pump technologies

The demand for more stringent emission standards worldwide presents considerable opportunities for the automotive active purge pump market. More advanced purge pump technologies will be needed by automakers to help vehicles meet these new emission norms. There is also scope for purge pump manufacturers to expand their product portfolio with innovative, customizable solutions tailored for specific vehicle classes and engine types.

To learn more about this report, request a free sample copy

In terms of components, DC motor segment is estimated to contribute the highest share owing 37.8% in 2024 of the automotive active purge pump market due to its reliability and high-performance capabilities. DC motors are very robust and durable, thus, allowing them to withstand the harsh under-hood environment of a vehicle for many years. Their brushless design removes the necessity for regular brush replacements, reducing maintenance costs over time. Compared to alternative motor types, DC motors also provide very precise speed control, acceleration, and braking response. This precision is critical for active purge pumps to effectively regulate fuel vapors in a vehicle's evaporative emissions system. DC motors' high torque output even at lower rpm further ensures purge pumps can overcome resistance in vapor lines and purge canisters. Auto manufacturers greatly value the reliability and performance consistency of DC motors, trusts them to fulfill strict emissions regulations worldwide.

Insights, By Vehicle Type- Convenience and safety boosts demand for passenger vehicle 

In terms of vehicle type, passenger vehicle segment is estimated to contribute the highest share owing 65.3% in 2024 of the automotive active purge pump market owing to drivers' needs for safety and convenience. Compared to commercial vehicles, passenger vehicles are used much more frequently for both personal and professional needs. Their daily use means any emissions-related issues could arise at inopportune times and negatively impact drivers. Relying on advanced active purge pumps provides drivers peace of mind that their vehicle's evaporative emissions control is functioning properly. The pumps also help passenger vehicles meet increasingly stringent vehicle emissions standards. Such regulations are more focused on passenger vehicles also due to their higher numbers on roads worldwide. Active purge pumps subtly perform their duties without any driver input needed. This allows drivers to focus fully on safety during each journey.

Insights, By Sales Channel- Stringent regulations drive OEM Sales

In terms of sales channel, original equipment manufacturers (OEMs) segment is estimated to contribute the highest share owing 71.3% in 2024 of the automotive active purge pump market due to need to meet rigorous vehicle certification requirements. Auto manufacturers rely heavily on vendor partners to supply emissions control hardware like active purge pumps that enables their vehicle models to clear all applicable legislative tests and certification protocols. Significant penalties dissuade OEMs from channeling parts through the aftermarket distribution network. Instead, these turn to pump suppliers with a proven track record of designing parts able to fulfill certification testing conducted by regulatory bodies worldwide. Long-term partnerships are built on open communication and flexibility when it comes to implementing design modifications ensuring ongoing regulatory compliance. Active purge pumps sourced through OEM supply chains allow automakers to confidently sign off their vehicles meet all applicable emissions standards from the outset.

Regional Insights

To learn more about this report, request a free sample copy

North America is the dominant region in the global automotive active purge pump market owing 49.3 % in 2024 due to the strong presence and production base of leading automakers in countries like the U.S. Vehicles produced in the region adhere to stringent emission regulations, thus, boosting  demand for active purge pumps for evaporative emission control. Brands like General Motors, Ford, and Tesla have a substantial market share in North America and invest heavily in improving fuel efficiency and reducing emissions from their vehicles. Many of the top tier automotive component suppliers are also headquartered in North America, thus, allowing easy access to advanced active purge pump technology.

Asia Pacific region is witnessing the fastest growth in the automotive active purge pump market. As countries such as China and India are the major emerging markets for the automotive industry globally, the demand for active purge pumps is increasing at an exponential rate. Lax emission standards in the past encouraged growth; however, governments are now tightening regulations to curb air pollution. This has compelled automakers to focus on incorporating emission control systems in vehicles produced and sold in the region. The low production costs and availability of cheap labor have attracted numerous global automakers to set up manufacturing bases in Asia Pacific through joint ventures with local partners. As vehicle production increases, there is a growing demand for active purge pumps to comply with emissions regulations. Countries like South Korea and Japan already have a well-established automotive base in Asia, and are at the forefront of adopting emerging automotive technologies, including active purge pumps. Local truck and commercial vehicle manufacturers in China are also gaining scale and upgrading their vehicles. Such wide-scale industrialization and the fast-growing middle-class consumer segment boosts more expensive vehicles with advanced features onto the roads in Asia Pacific, propelling demand for active purge pumps. With global automakers innovating to expand their presence across the region, the automotive active purge pump market is poised to grow significantly in Asia Pacific in the coming years.

Market Report Scope

Key Developments

• In September 2023, DENSO is a leading global supplier of advanced automotive technology, systems, and components. launched "Every cool," a cooling system for trucks, cutting fuel use and boosting energy efficiency, promoting eco-friendly practices in the logistics sector
• In September 2023, Marelli is a global leader in providing advanced automotive technology solutions. launched new smart actuators for electric vehicles, thus, improving transmission control and thermal management, meeting the automotive industry's evolving needs for streamlined solutions. These upgrades simplify vehicle mechanics and electronics, indirectly benefiting emissions reduction, energy efficiency, and overall sustainability.
• In August 2023, Vitesco Technologies and Cebi Group collaborated for an Advanced Sensor Cleaning System (ASCS) for autonomous electric driving, thus, ensuring environmental sensors stay clean. The system, featuring high-pressure pumps and control electronics, reduces water use and enables seamless integration for vehicle manufacturers.
• In January 2022, DENSO and Aisan agreed to transfer DENSO's fuel pump module business to Aisan, aiming to enhance both companies' competitiveness. This allows DENSO to focus on its goals of achieving carbon neutrality and zero traffic accidents while empowering Aisan to improve its product capabilities and production efficiency.

*Definition: Automotive Active Purge Pump Market involves components and systems that help remove stored fuel vapors from a vehicle's charcoal cannister and emission control system. An active purge pump sucks in fresh air from outside and pushes the vapors into the engine intake tract during certain driving conditions to be burned, preventing buildup of harmful evaporative emissions. It is a key part of a vehicle's evaporative emission control system that helps meet regulatory emissions standards.

Market Segmentation

• Components Insights (Revenue, US$ MN, 2019 - 2031)
  • Sensors
  • DC Motor
  • Valves
  • Actuators
•  Vehicle Type Insights (Revenue, US$ MN, 2019 - 2031)
  • Commercial Vehicle
  • Passenger Vehicle
•  Sales Channel Insights (Revenue, US$ MN, 2019 - 2031)
  • Aftermarket
  • Original Equipment Manufacturers (OEMs)
• Regional Insights (Revenue, US$ MN, 2019 - 2031)
  • North America
    • U.S.
    • Canada
  • Latin America
    • Brazil
    • Argentina
    • Mexico
    • Rest of Latin America
  • Europe
    • Germany
    • U.K.
    • France
    • Italy
    • Russia
    • Rest of Europe
  • Asia Pacific
    • China
    • India
    • Japan
    • Australia
    • South Korea
    • ASEAN
    • Rest of Asia Pacific
  • Middle East & Africa
    • GCC Countries
    • South Africa
    • Rest of Middle East & Africa
• Key Players
  • Continental AG
  • Denso Corporation
  • Vitesco Technologies
  • Hyundai Kefico
  • Agilent Technologies
  • Robert Bosch GmbH
  • Rheinmetall Automotive
  • Sauermann
  • TSURUMI AMERICA INC.
  • HELLA GmbH & Co. KGaA
  • Dial Manufacturing, Inc.
  • Marelli Corporation
  • Akebono Brake Company
  • Allied-Nippon Limited
  • Hitachi Automotive Systems Ltd.
  • Aruba ClearPass